- Description
- Downloads
Quick system checks just got quicker.
Wireless range of 1,000’.
Directly connects to mobile device with Job Link System App
Fast accurate temps with new Rapid Rail technology
Pressures auto calibrate at any elevation
Great for critically charged systems
Connect two pressure probes and two pipe temperature clamps to immediately see system charge on your Job Link® System mobile app. Easily determine if unit is running properly, or if troubleshooting is needed. All measurements can be sent up to 1000’ away directly your mobile device. Each tool is designed for agility and speed. The pressure probe fits into tight spaces. The pipe clamp uses a new Rapid Rail™ sensor design to deliver accuracy, speed, and agility, even on the most awkward pipe configurations. Do more with Job Link probes!
Powerful Wireless Signal Strength
Up to 1000’ wireless signal
Powerful enough to go through most walk-in coolers and freezers
Directly transmits to your mobile device
Rapid Rail™ Sensor Advantages
Stabilizes in under 5 seconds
Beeper and LED indicate accurate connection
The Rapid Rail™ sensor uses pipe to complete circuit so ambient conditions don’t affect the measurement
Narrow jaw connects in tight spaces and on irregular pipe shapes
Reliable Pressures Regardless of Location
45° angled fitting easily connects in tight spaces
Pressure sensors are accurate at any elevation
Calibrates automatically when powered on
Includes:
2 x JL3PC Job Link Premium Pipe Clamp Probes
2 x JL3PR Job Link Pressure Probes
ANC18 Protective Case
2 x AAA Batteries Per Probe (8 Total)
SPECIFICATIONS
Wireless Range: 1000 feet or more (305 meters)
Wireless Frequency: 2.4 GHz
Battery: 2x AAA (included)
Battery Life: 150 hours typical alkaline
Auto Power Off (APO): 2 hours (can be disabled)
Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or Android™ 5.0
Job Link Pressure Probe – JL3PR
Connector Type: 45° Standard 1/4” NPT female flare
Best Accuracy: ±1 psig (±7 kPa)
Measurement Range: 0 to 580 psig (0 to 4000 kPa)
Maximum Overload: 800 psig (5500 kPa)
Water Resistant: Designed to IP55
Job Link Premium Pipe Clamp Probe – JL3PC
Pipe Compatibility: Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia.
Accuracy: ±1°F (±0.6°C)
Measurement Range: -50°F to 257°F (-46°C to 125°C)
Stabilization Time: Three seconds typical
Measurement Feedback: Beeper and LED
Water Resistant: Designed to IP55
Patent: 10,365,165
Wireless range of 1,000’.
Directly connects to mobile device with Job Link System App
Fast accurate temps with new Rapid Rail technology
Pressures auto calibrate at any elevation
Great for critically charged systems
Connect two pressure probes and two pipe temperature clamps to immediately see system charge on your Job Link® System mobile app. Easily determine if unit is running properly, or if troubleshooting is needed. All measurements can be sent up to 1000’ away directly your mobile device. Each tool is designed for agility and speed. The pressure probe fits into tight spaces. The pipe clamp uses a new Rapid Rail™ sensor design to deliver accuracy, speed, and agility, even on the most awkward pipe configurations. Do more with Job Link probes!
Powerful Wireless Signal Strength
Up to 1000’ wireless signal
Powerful enough to go through most walk-in coolers and freezers
Directly transmits to your mobile device
Rapid Rail™ Sensor Advantages
Stabilizes in under 5 seconds
Beeper and LED indicate accurate connection
The Rapid Rail™ sensor uses pipe to complete circuit so ambient conditions don’t affect the measurement
Narrow jaw connects in tight spaces and on irregular pipe shapes
Reliable Pressures Regardless of Location
45° angled fitting easily connects in tight spaces
Pressure sensors are accurate at any elevation
Calibrates automatically when powered on
Includes:
2 x JL3PC Job Link Premium Pipe Clamp Probes
2 x JL3PR Job Link Pressure Probes
ANC18 Protective Case
2 x AAA Batteries Per Probe (8 Total)
SPECIFICATIONS
Wireless Range: 1000 feet or more (305 meters)
Wireless Frequency: 2.4 GHz
Battery: 2x AAA (included)
Battery Life: 150 hours typical alkaline
Auto Power Off (APO): 2 hours (can be disabled)
Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or Android™ 5.0
Job Link Pressure Probe – JL3PR
Connector Type: 45° Standard 1/4” NPT female flare
Best Accuracy: ±1 psig (±7 kPa)
Measurement Range: 0 to 580 psig (0 to 4000 kPa)
Maximum Overload: 800 psig (5500 kPa)
Water Resistant: Designed to IP55
Job Link Premium Pipe Clamp Probe – JL3PC
Pipe Compatibility: Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia.
Accuracy: ±1°F (±0.6°C)
Measurement Range: -50°F to 257°F (-46°C to 125°C)
Stabilization Time: Three seconds typical
Measurement Feedback: Beeper and LED
Water Resistant: Designed to IP55
Patent: 10,365,165
Downloads for Fieldpiece Job Link Charge Test Kit (2xJL3PR+2xJL3PC):
Please select next action
